Call Us: 661-294-3836
sales@actechnol.com
Our Coating Guide
PVD Coating Services
* There are several versions of DLC based coatings. The information provided is for information purposes only, please contact us for your specific needs.
© The Coating with this mark in the label are propiatary; please call us if additional information is needed.
Special Coatings are not produced on a daily basis; please contact us directly to discuss your needs and requirements.
| COATINGS | TiN | TiCN | ZrN | CrN | TiAlN | AlTiN | AlTiCrN | Quantum © | X-LC© | DLC* |
|---|---|---|---|---|---|---|---|---|---|---|
| COATINGS | Titanium Nitride | Titanium Carbonitride | Zirconium Nitride | Chromium Nitride | Titanium Aluminum | Aluminum Titanium Nitride | Aluminum Titanium Nitride | Quantum Plus Titanium Chromium Nitride | Molybdenum Disulfide Nitride Alloy | Diamond Like Carbon |
| Hardenss [HV] | 2400 | 3500 | 2400 | 1800 | 3400 | 3600 | 3400 | 2400 | 600 | 10 -40 GPA |
| Friction Coefficient | 0.4 | 0.25 | 0.3 | 0.3 | .60 | .60 | 0.5 | 0.3 | <0.1 | .0.2 - 0.3 |
| Thickness [Microns] | 1-7 | 1-4 | 1-4 | 1-4 | 1-4 | 1-4 | 1-4 | 1-4 | 1 | 2 - 3 |
| Color | Gold | Silver Grey | Light Gold | Silver Grey | Blue Grey | Dark Grey | Silvery Grey | Off Gold | Black | Transparent |
| Max. Working | 600 C | 400 C | 550 C | 700 C | 700 C | 700 C | 850 C | 660 C | 200 C | 200 C |
| Temperature | 1100 F | 750 F | 1050 F | 1300 F | 1300 F | 1300 F | 1550 F | 1100 F | 400 F | 400 F |
| Special Characteristics: | The Genereal Purpose | Conventiaonal | Monolayer coating with | The standard coating for | Universal High | Universal High | All in One Coating | High Wear Resistant | Coating with a Low Coefficient | Ultimate Performance |
| Coating | Carbonitride Coating | Ti- or Cr- based adhesion Layer | non-cutting applications | Performance Coating | Performance Coating | for Universal Use | Coating | of Friction | Coating | |
| - Cutting: Universal use | - For Milling & Tapping | - Reduces built-up edges | - For Molds & Dies | - A universal high performance coating | - A universal high performance coating | - Universal, wet & dry machining | - Good Lubricity | - Dry lubricant Film | - Broad range of substrate materials. | |
| - Forming: Molds & Dies | - For Stamping, Punching & Forming | - Machining Alluminum & Titanium | - For Machine Parts | - High Hardness & Corrosion Restance | - Cutting abrasive materials, dry machining | - Corosion Resistant | ||||
| - For Medical Applications | - For optimal release of molds and dies | - Very High Oxidation Resistance | - No distortion of high precision substrates | |||||||
| - High Heat Resistance | Corrosion Restance | materials, dry machining | - Excellent Adhesion | |||||||
| - Decorative Color | - Very low friction properties | |||||||||
| Applicable for Materials: | - Steels | - Steels | - Steels | - Steels | - Steels | - Steels | - Steels | - Milling Titanium | - Machinging Aluminium for for Ball Bearings. | - Molds & Mold Components |
| - Cast Iron | - Alloyed Steels | - Alloyed Steels | - Copper | - Cast Irons | - Cast Irons | - Alloyed Steels | - Inconel Materials | - Plastic Parts | - 3D Componets | |
| - Aluminium <12% Si | - Superalloys | - Superalloys | - Super Alloys | - Plastic Injection Molds | - Broad Range of Conductive & Non-Conductive Materials | |||||
| - Copper | - Cast Iron | - Superalloys | - Cast Iron | - Engine Components | - Nascar Vehicle parts | |||||
| - Bronze | - Aluminium >12% Si | - Aluminium <12% Si | - Shafts & Gears | - Diesel injection pumps | ||||||
| - Brass Plastics | - Aluminium <12% Si | - Copper | - Fastners & Wear Plates | - Human heart pump implants | ||||||
| - Copper | - Bronze, Brass Plastics | - Vaccum/Space Applications | - Textile Industry parts | |||||||
| - Bronze, Brass Plastics | - Wood | |||||||||
| - Wood |
Our Coating Guide
SPECIAL Coating Services
| SPECIAL COATINGS | AlTiSiN© | ALTICMAS© | NACRO® |
|---|---|---|---|
| Aluminum Titanium Silicon Nitride | Propietary Coating | Nanocomposite coating | |
| Hardenss [HV] | 4500 | 3400 | |
| Friction Coefficient | 0.45 | 0.2 | 0.45 |
| Thickness [Microns] | 1-4 | 1-3 | 1-7 |
| Color | Dark Grey | Grey | Blue-Grey |
| Max. Working | 1200 C | 400 C | 1100 C |
| Temperature | 2200 F | 750 F | 2000 F |
| Special Characteristics | Extremely High Hardness Coating | Dry Lubricant Film | All- |
| - Good Corrosion Resistance | - High Harness; low coefficient of friction | - High Scratch Resistance | |
| - High Thermal threshold | - High Heat Resistance | ||
| - High Coating Thickness possible | |||
| - Eliminates important disadvantages of ALCrnN | |||
| - For "Tough" diffcult to cut materials | |||
| Applicable for Materials: | - Machining hard, drymilling abrasive materials. | - Machining Composites | - Steels |
| - High Speed Operations | - Hardened Steel | - Alloyed Steels | |
| - Wood Cutting | - Super Alloys | ||
| - Cast Iron | |||
| - Aluminium > 12% Si |